Who is the supplier of Inconel 600 material?

GNEE STEEL is one of the top companies in China manufacturing, supplying and exporting Inconel 600 sheets and sheets. Inconel 600 Plate and Inconel 600 Plate are nickel-chromium alloys with added aluminum that are very resistant to oxidation and other types of high-temperature corrosion. These Inconel 600 sheets (UNS N06600) are used for the fabrication of supports for radiant tubes and steam superheater tube supports, as well as support grids for heat treatment muffle furnaces and stills and catalysts for the manufacture of nitric acid. Inconel alloy 600 sheet is also used in the manufacture of combustion chambers, tube supports and ashtrays in power plants. Inconel 600 plate is a solid solution alloy made of nickel and chromium that works well at temperatures up to around 1200°C. Inconel 600 plate will not rust in water because it contains high amounts of nickel and chromium. The strength and toughness are very good and will not change even after long-term use at high temperatures. Inconel 600 sheet will not be nitrided in free ammonia and Inconel 600 coil is the only product that performs better in this situation. Inconel 600 rolled plate is strong, tough and flexible and can be used in temperatures as low as -196 degrees Celsius. Inconel 600 Flat Sheet is an Inconel alloy that comes in many different forms such as Inconel Alloy 600 Plate and Inconel 600 Perforated Sheet. Inconel 600 rolled plate is very strong at high temperatures and remains flexible even after extended use. It will also not rust where there is oxygen. Inconel 600 hot rolled plate is highly resistant to oxidation at high temperatures (up to 2200 o F) and also resists corrosion well in water. In places with higher temperatures, Inconel 600 composite panels can be used. Inconel 600 Plate and Inconel 600 Plate are available in different sizes, specifications and shapes to suit the needs of our valued customers.
Who is the supplier of Inconel 600 material?

Inconel 600 Plates & Inconel 600 Sheets Specifications

Specifications	:	ASTM / ASME SB 168
Size	:	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	:	0.1mm to 12 mm Thk
Form	:	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish	:	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness	:	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Inconel 600 Plates & Inconel 600 Sheets Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

Inconel 600 Plates & Inconel 600 Sheets Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 600	8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %