In April, a customer from Saudi Arabia was invited to our company for a site visit. In order to let the customer have a more comprehensive understanding of GNEE's development history, business philosophy, technical strength, product quality, etc., accompanied by the relevant person in charge, the customer visited the company's factory, production workshop and exhibition hall in turn, and introduced the company's product information, technical strength, after-sales service system, relevant cooperation cases, etc. to the visiting guests in detail.

On March 8, 2023, GNEE organized a special gesture of appreciation for its female employees.

Founded in 2008, with 5 million RMB registered capital, At present, the total investment amount reaches 30 million RMB, workshop area more than 35000㎡,with over 100 employees.

Technical Drawing & Function
The ASME B16.11 bushing has male threads on the surface of outside diameter (O.D.) and female threads on the surface of inside diameter (I.D.). When used in piping connection, its O.D. screws into the larger-diameter pipe with female threads and its I.D. screws into the smaller-diameter pipe with male threads, thus, makes a reduction in line size like a reducer. ASME B16.11 bushings can be further classified into hex head bushing and flush bushing, of which hex head bushings are most commonly used. The bushings are available in sizes 1/8″ through 4″. They are not identified by class designation and may be used for pressure ratings up to Class 6000 designation.

The technical drawing of 3 types of ASME B16.11 plug: (I) square head plug; (II) hex head plug; (III) round head plug. A: minimum length; B: minimum height of square head; C: minimum width flats; D: minimum overall length of round head plug; E: nominal round head diameter; H: minimum height of hex head; F: nominal width flats of hex head.

The technical drawing of ASME B16.11 street elbow with one end MNPT and other end FNPT. H: outside diameter of band; B: minimum length of perfect thread; L2: effective length of external thread; L: minimum length of male thread; G2: minimum wall thickness; J: center-to-male end of street elbow; G1: minimum wall thickness; A: center-to-female end of street elbow.