Stainless Steel Stub End

Stainless steel Lap Joint Stub End are a fittings that are used in the place of welded flanges to support the rotating back of flanges when required. Stainless steel Lap Joint Stub End is the second name of lab joint if I’m not wrong. Stainless steel Lap Joint Stub End are used in the place of welded flanges where the rotating are desired.
Stainless steel stub or long or short ends are those mechanical joints that comprises of two components. The stainless steel stub ends are essentially a short length of pipe which has one end that is flared outwards and the other end prepared to be welded to pipe of the same nominal pipe size material and of a similar wall thickness.

Lap Joint Stub End Specification Schedule

Specifications
Type A Pipe Fittings size	Seamless Butt Weld Fittings: 1/2" - 10" Welded Butt Weld Fittings: 1/2" - 48"
Standards	ANSI - B 16.9 ASTM A403 - ASME SA403 - 'Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings' API 590-605 ASME B16.9 - 'Factory-Made Wrought Buttwelding Fittings'' ASME B16.25 - 'Buttwelding Ends' ASME B16.28 - 'Wrought Steel Buttwelding Short Radius Elbows and Returns' MSS SP-43 - 'Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications'
Type B Dimensions	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Sch 10 Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Jis 10k Types	Seamless / ERW / Welded / Fabricated Pipe Fittings
Long Type	DN15-DN1200
Connection	Welding
Variations	Welded & Seamless MSS-A; MSS-B; MSS-C Short type & Long type
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range	½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Type B Fittings	Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process	Push, Press, Forge, Cast, etc.
Jis 10k Fittings Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Key markets and industries for	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Application	Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc ASME B16.9 Schedule 10 are an economical alternative for lower-pressure applications. ANSI B16.9 Schedule 40 have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Stub End Finish

Beveled Ends
Squared Ends
Flanged Ends
Grooved Ends
Threaded Ends (Male Only)

Short/Long Pattern Stub Ends (Asa/Mss)

Stub ends are available in two different patterns:

the short pattern, called MSS-A stub ends
the long pattern, called ASA-A stub ends (or ANSI length stub end)

Asme B16.9 Lap Joint Stub End Price List

Lap joint stub end	Price Range	Unit
ASTM B16.9 Lap Joint Pure Nickel Stub End Pipe Fittings	$1.50-$500.00	USD/Piece
2″ Inch Sch40 Pipe Fittings Lap Joint Stub Ends	$4.00-$35.00	USD/Piece
SS Lap Joint Stub End Pipe Fitting	$1.00-$100.00	USD/Piece
Lap Joint DN100 DN150 DN200 SCH10S Titanium Stub	$4.80-$32.00	USD/Piece
Butt Welding Pipe Fitting Stub End	$1.00-$999.00	USD/Piece
Lap Joint Stub End Butt Welding pipe fitting ASME B16.9	$1.00-$10.00	USD/Piece
WP 321 Stainless steel pipe fittings lap joint stub end	$1.00-$30.00	USD/Piece
Sch10 Lap Joint Stub End	$1.02-$100.00	USD/Piece
titanium lap joint stub end cap fitting	$5.00-$30.00	USD/Piece
Butted Welded Lap Joint Stub End	$0.30-$50.00	USD/Piece
stub end titanium collar short pattern pipe fitting	$5.00-$30.00	USD/Piece
S31803 Stub End BW Pipe Fittings Lap Joint	$0.10-$10.00	USD/Piece
Sch 40 SS Lap Joint Stub End Pipe Fittings	$1.00-$50.00	USD/Piece
Long Lap Joint Stub Ends for Pipe Fittings	$0.10-$19.90	USD/Piece
Brass long lap joint flange seamless stub ends	$0.10-$99.00	USD/Piece
Butt Weld Fitting Stainless Steel Short Stub End	$1.00-$100.00	USD/Piece
Copper nickel pipe short collar rj stub end	$1.00-$100.00	USD/Piece
Seamless stub end fittings	$6.10-$7.60	USD/Piece

Stub Ends Types

Stub ends are available in three different types, named “Type A”, “Type B” and “Type C”:

The first type (A) is manufactured and machined to match standard lap joint backing flange (the two products have to be used in combination). The mating surfaces have an identical profile to permit a smooth loading of the flare face
Stub ends type B are have to be used with standard slip-on flanges
Type C stub ends can be used either with lap joint or slip-on flanges and are manufactured from pipes
Stub End
Lap Joint Stub End
Pipe Stub End
Short Stub end
Long Stub end
Stub End Flange
Stub End Fittings
Lap Joint Flange Stub End
Type A Stub End
Stub End
Buttweld Long Stub Ends
Asme B16.9 Stub End
MSS sp 43 stub end
MSS type a stub end
MSS sp-43 type b stub end
MSS type c stub end
MSS short stub end
MSS-SP-43 Type C Stub End
Buttweld Long Stub End
Stub End Fittings

Material Of Stub End Buttweld Fittings

ASTM	Grade	UNS Equivalent
A234 WPB Carbon Steel	B	K03006
A403 Stainless Steel	304/304L	S30403
	304H	S30409
	316/316L	S31603
	316H	S31609
	317L	S31703
	904L	N08904
	309S/H	S30908
	310S	S31008
	321	S32100
	6XN	N08367
	20CB	N08020
	347	S34709
	254SMO	S31254
A815 Duplex /Super Duplex	2205	S31803/S32205
	Zeron 100	S32760
	2507	S32750
	410	S41000
A366 Nickel Alloys	HC22	N06022
	HB-3	N10675
	HG3	N06985
	HX	N06002
	HC2000	N06200
	HC276	N10276
	NCI	N06600
	NC	N04400
	N	N02200
	NL	N02201
	NCMC	N06625
	NICMC	N08825
	NIC10	N08810
	NIC11	N08811

Carbon Steel	ASTM A105 ASME SA105 Fittings DIN 1.0402 Type A DIN 1.0460 Type B DIN 1.0619 Long ASTM A105N Jis 10k ASME SA105N Long ASTM A350 LF2 Type A ASME SA350 Type B High Yield CS ASTM A694 Sch 10
Stainless Steel	ASTM A182 F304 Fittings ASTM A182 F304L Jis 10k ASTM A182 F316 Type B ASTM A182 F316L Fittings ASTM A182 F317 Jis 10k ASTM A182 F317L Sch 10 ASTM A182 F321 Fittings ASTM A182 F321H Type A ASTM A182 F347 ASTM A182 F347H Long
Alloy Steel Fittings	ASTM A182 F5 Type A ASTM A182 F9 Type B ASTM A182 F11 ASTM A182 F22 Jis 10k ASTM A182 F91 Fittings
Inconel Type A	Inconel 600 Type B Inconel 601 Fittings Inconel 625 Long Inconel 718 Sch 10 Inconel x750
Copper Type B	T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Sch 10	Copper Nickel 90/10 (C70600 ) Fittings, Cupro Nickel 70/30 (C71500) , UNS C71640 Type B
Brass Long	3602 / 2604 / H59 / H62 / etc.
Hastelloy Jis 10k	Hastelloy C276 (UNS N10276) , C22 (UNS N06022) Fittings, C4 , C2000 Type A, B2 Type B , B3 , X Long
Monel Jis 10k	Monel 400 (UNS No. N04400) , Monel 500 (UNS No. N05500) Type A
Alloy 20 Type B	Carpenter® 20 Alloy Jis 10k, Alloy 20Cb-3 Sch 10
Aluminium Type A	5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel Sch 10	Nickel 200 , Nickel 201 Long
Duplex Jis 10k	S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex	S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Type B	Incoloy 800 Long , Incoloy 800H , Incoloy 800HT (UNS N08800) Type A, Incoloy 825 (UNS N08825) Sch 10
254 Smo Fittings	SMO 254/6Mo Type B , UNS S31254 , DIN 1.4547 Type A
Nimonic Jis 10k	Nimonic 75 , Nimonic 80A , Nimonic 90 Sch 10
Other Long material	Tin bronze Type A, Alumunum bronze Jis 10k, Lead bronze Jis 10k
Titanium Sch 10	ASTM B381 Titanium Gr. 1 Fittings ASTM B381 Titanium Gr. 2 Jis 10k ASTM B381 Titanium Gr. 4 Type A ASTM B381 Titanium Gr. 5 ASTM B381 Titanium Gr. 7 Sch 10

Dimensional Tolerances Of Stub Ends Mss Sp-43

Nominal Pipe Size	1/2 up to 2.1/2	3 to 3.1/2	4	5 to 8	10 to 18	20 to 24
Outside Diameter at Welding End (OD)	0.8	0.8	0.8	+ 1.6 - 0.8	+ 2.29 - 0.76	+ 3.05 - 0.76
Overall Length (F)	1.6	1.6	1.6	1.6	2	2
Outside Diameter of Lap (G)	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6
Thickness of Lap (T)	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0
Fillet Radius of Lap (R)	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6
Wall Thickness (t)	Not less than 87.5% of Nominal Wall Thickness

NOMINAL PIPE SIZE NPS	ANGULARITY TOLERANCES	ANGULARITY TOLERANCES	ALL DIMENSIONS ARE GIVEN IN INCHES. TOLERANCES ARE EQUAL PLUS AND MINUS EXCEPT AS NOTED.
	Off Angle Q	Off Plane P	(1) Out-of-round is the sum of absolute values of plus and minus tolerance. (2) This tolerance may not apply in localized areas of formed fittings where increased wall thickness is required to meet design requirements of ASME B16.9. (3) The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser.(4) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside diameter, which equals the difference between the nominal outside diameter and twice the nominal wall thickness.
½ to 4	0.03	0.06
5 to 8	0.06	0.12
10 to 12	0.09	0.19
14 to 16	0.09	0.25
18 to 24	0.12	0.38
26 to 30	0.19	0.38
32 to 42	0.19	0.50
44 to 48	0.18	0.75

Manufacturing Standard Of Short Stub End

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2
ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASME B16.9 – Factory-Made Wrought Fittings Buttwelding
ASME B16.25 – Buttwelding Ends ASME B16.28 – Wrought Steel Short Radius Elbows and Buttwelding Returns
MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

Size Chart Of EN 1092-1 Stub End

Nominal Pipe Size (NPS)	Outside Diameter at Bevel	Outside Diameter of Barrel		Length F		Radius of Fillet R		Diameter of Lap G
Nominal Pipe Size (NPS)	Outside Diameter at Bevel	Min.	Max.	ANSI	MSS	ANSI & MSS Type A	MSS Type B	Diameter of Lap G
1/2	21.3	20.55	22.76	76.2	50.8	3.0	0.8	35.0
3/4	26.7	25.88	28.09	76.2	50.8	3.0	0.8	42.9
1	33.4	32.61	34.95	101.6	50.8	3.0	0.8	50.8
1-1/4	42.2	41.38	43.59	101.6	50.8	4.8	0.8	63.5
1-1/2	48.3	47.47	49.94	101.6	50.8	6.4	0.8	73.2
2	60.3	59.54	62.38	152.4	63.5	7.9	0.8	91.9
2-1/2	73.0	72.24	75.34	152.4	63.5	7.9	0.8	104.6
3	88.9	88.11	91.34	152.4	63.5	9.7	0.8	127.0
3-1/2	101.6	100.81	104.04	152.4	76.2	9.7	0.8	139.7
4	114.3	113.51	116.66	152.4	76.2	11.2	0.8	157.2
5	141.3	140.51	144.35	203.2	76.2	11.2	1.5	185.7
6	168.3	167.49	171.27	203.2	88.9	12.7	1.5	215.9
8	219.1	218.29	222.07	203.2	101.6	12.7	1.5	269.7
10	273.1	272.26	277.19	254.0	127.0	12.7	1.5	323.9
12	323.9	323.06	327.99	254.0	152.4	12.7	1.5	381.0
14	355.6	354.81	359.92	304.8	152.4	12.7	1.5	412.8
16	406.4	405.61	410.97	304.8	152.4	12.7	1.5	469.9
18	457.2	456.41	462.03	304.8	152.4	12.7	1.5	533.4
20	508.0	507.21	514.10	304.8	152.4	12.7	1.5	584.2
22	558.8	558.01	564.90	304.8	152.4	12.7	1.5	641.4
24	609.6	608.81	615.70	304.8	152.4	12.7	1.5	692.2

Stub End Din 2642 Weight Chart

Weight Chart Of Stub End Din 2642 Sch 10

NPS inches	STUB ENDS
NPS inches	Sch. 5S	Sch. 10S	Sch. 40S	Sch. 80S
1/2	0.06	0.08	0.12	0.13
3/4	0.07	0.09	0.15	0.17
1	0.09	0.15	0.20	0.25
1 1/4	0.13	0.20	0.30	0.35
1 1/2	0.16	0.25	0.38	0.46
2	0.25	0.40	0.55	0.75
2 1/2	0.35	0.50	0.80	1.00
3	0.50	0.60	1.10	1.50
4	0.70	1.00	1.80	2.50
5	1.00	1.25	2.50	3.50
6	1.60	1.95	3.70	5.50
8	2.50	3.10	5.90	10.0
10	4.00	4.90	10.5	14.0
12	6.60	7.10	15.0	20.0
14	6.40	7.80	15.5	20.5
16	7.90	9.00	18.0	24.0
18	9.30	10.5	21.0	28.0
20	12.0	13.5	23.5	31.0
24	16.5	19.0	28.5	38.0
Approximate weights in kg, density 8 kg/dm3

ASME B16.9 Stub Ends Length
Stub ends are usually manufactured in two ways, Type A and Type B. They are available in two standard length, long (ANSI) or short pattern (MSS).
Schedule 5s and 10s stub end are usually offered in short lengths, and long lengths are available on special order. Schedule 40s stub end are supplied in either short or long lengths

Nominal Pipe Size	Outside diameter of barrel		Length (F)		Radius (R)	Diameter (G)
Nominal Pipe Size	Minimum	Maximum	Long Pattern	Short Pattern	Radius (R)	Diameter (G)
1/2″	20.5	22.8	76	51	3	35
3/4″	25.9	28.1	76	51	3	43
1″	32.6	35.0	102	51	3	51
1 1/4″	41.4	43.6	102	51	5	64
1 1/2″	47.5	49.9	102	51	6	74
2″	59.5	62.4	152	64	8	92
2 1/2″	72.2	75.3	152	64	8	105
3″	88.1	91.3	152	64	10	127
3 1/2″	100.8	104.0	152	76	10	140
4″	113.5	116.7	152	76	11	157
5″	140.5	144.3	203	76	11	186
6″	167.5	171.3	203	89	13	216
8″	218.3	222.1	203	102	13	270
10″	272.3	277.2	254	127	13	324
12″	323.1	328.0	254	152	13	381
14″	354.8	359.9	305	152	13	413
16″	405.6	411.0	305	152	13	470
18″	456.0	462.0	305	152	13	533
20″	507.0	514.0	305	152	13	584
22″	558.0	565.0	305	152	13	641
24″	609.0	616.0	305	152	13	692

ASTM Specification Of Stub End
Austenitic Stainless Steel
ASTM A403 Gr F304
ASTM A403 Gr F316
ASTM A403 Gr F321
ASTM A403 Gr F347
ASTM A403 Gr F304L
ASTM A403 Gr F316L
ASTM A403 Gr F317
ASTM A403 Gr F317L
ASTM A403 Gr F321
ASTM A403 Gr F310
ASTM A403 Gr 347
Carbon Steel
ASTM A234 WPB
ASTM A420 WPL6
Alloy Steel High-Temp
ASTM A234 WP5
ASTM A234 WP11
ASTM A234 WP9
ASTM A234 WP22
ASTM A234 WP91
Nickel Alloy
ASTM B564
astm b564 uns n06600
astm b564 uns n06625
astm b564 uns no4400
astm b564 uns n08810
astm b564 uns n08811
astm b564 uns n08825
astm b564 uns n04400
astm b564 uns n10276
astm b564 uns n10665

Asme B16.9 Stub End Fittings Dimensions

NPS	OD	T	G	F	R Type A	R Type B
1/2	21.3	2.11	34.9	50.8	3.05	0.76
3/4	26.7	2.11	42.9	50.8	3.05	0.76
1	33.4	2.77	50.8	50.8	3.05	0.76
1.1/4	42.2	2.77	63.5	50.8	4.83	0.76
1.1/2	48.3	2.77	73	50.8	6.35	0.76
2	60.3	2.77	92.1	63.5	7.87	0.76
2.1/2	73	3.05	104.8	63.5	7.87	0.76
3	88.9	3.05	127	63.5	9.65	0.76
3.1/2	101.6	3.05	139.7	76.2	9.65	0.76
4	114.3	3.05	157.2	76.2	11.18	0.76
5	141.3	3.40	185.7	76.2	11.18	1.52
6	168.3	3.40	215.9	88.9	12.7	1.52
8	219.1	3.76	269.9	101.6	12.7	1.52
10	273.1	4.19	323.9	127	12.7	1.52
12	323.9	4.57	381	152.4	12.7	1.52
14	355.6	4.78	412.8	152.4	12.70	1.52
16	406.4	4.78	469.9	152.4	12.7	1.52
18	457.2	4.78	533.4	152.4	12.70	1.52
20	508	5.54	584.2	152.4	12.70	1.52
24	609.6	6.35	692.2	152.4	12.7	1.52

Dimensions are in millimeters unless otherwise indicated. Weights are in kilograms and approximately given.

Long Stub End Dimension

Product	Nom. Pipe Size	Dia (G)	Length (F), Short	Outside Dia (O.D.)	Sch 160, Inside Dia (I.D.)	Sch 160, Lap Thickness (t)	Schedule 160, Wall Thickness (T)	XX Strong Wall Approx. Weight	XX Strong Wall, Inside Dia (I.D.)
1 1/2″ Long Type “A	1.5	2.875	2	1.9	1.338	0.281	0.281	2.98	1.1
1 1/2″ Long Type “A”	1.5	2.875	4	1.9	0.15	0.15	1.49	1.5	0.2
1 1/4″ Long Type “A	1.25	2.5	2	1.66	1.16	0.25	0.25	2.52	0.896
1 1/4″ Long Type “A”	1.25	2.5	4	1.66	0.14	0.14	1.26	1.278	0.191
1″ Long Type “A	1	2	2	1.315	0.815	0.25	0.25	1.76	0.599
1″ Long Type “A”	1	2	4	1.315	0.133	0.133	0.88	0.957	0.179
1/2″ Long Type “A	0.5	1.375	2	0.84	0.464	0.187	0.188	0.68	0.252
1/2″ Long Type “A”	0.5	1.375	3	0.84	0.109	0.109	0.34	0.546	0.147
10″ Long Type “A	10	12.75	5	10.75	8.5	1.125	1.125	–	–
10″ Long Type “A”	10	12.75	10	10.75	0.365	0.365	54	9.75	0.5
12″ Long Type “A	12	15	6	12.75	10.126	1.312	1.312	–	–
12″ Long Type “A”	12	15	10	12.75	0.375	0.375	64.5	11.75	0.5
14″ Long Type “A”	14	16.25	12	14	0.375	0.375	84	13	0.5
16″ Long Type “A”	16	18.5	12	16	0.375	0.375	98	15	0.5
18″ Long Type “A”	18	21	12	18	0.375	0.375	136	17	0.5
2 1/2″ Long Type “A	2.5	4.125	2.5	2.875	2.125	0.375	0.375	8.8	1.771
2 1/2″ Long Type “A”	2.5	4.125	6	2.875	0.203	0.203	4.4	2.323	0.276
2″ Long Type “A	2	3.625	2.5	2.375	1.689	0.343	0.343	6.1	1.503
2″ Long Type “A”	2	3.625	6	2.375	0.154	0.154	3.05	1.939	0.218
20″ Long Type “A”	20	23	12	20	0.375	0.375	157	19	0.5
3 1/2″ Long Type “A	3.5	5.5	3	4	–	–	–	15.5	2.728
3 1/2″ Long Type “A”	3.5	5.5	6	4	0.226	0.226	7.75	3.364	0.318
3″ Long Type “A	3	5	2.5	3.5	2.624	0.438	0.438	9.8	2.3
3″ Long Type “A”	3	5	6	3.5	0.216	0.216	6.5	2.9	0.3
3/4″ Long Type “A	0.75	1.688	2	1.05	0.612	0.218	0.219	0.94	0.434
3/4″ Long Type “A”	0.75	1.688	3	1.05	0.113	0.113	0.47	0.742	0.154
4″ Long Type “A	4	6.188	3	4.5	3.438	0.531	0.531	19.3	3.152
4″ Long Type “A”	4	6.188	6	4.5	0.237	0.237	9.65	3.826	0.337
5″ Long Type “A	5	7.313	3	5.563	4.313	0.625	0.625	32.66	4.063
5″ Long Type “A”	5	7.313	8	5.563	0.258	0.258	16.33	4.813	0.375
6″ Long Type “A	6	8.5	3.5	6.625	5.187	0.718	0.719	45.26	4.897
6″ Long Type “A”	6	8.5	8	6.625	0.28	0.28	22.63	5.761	0.432
8″ Long Type “A	8	10.625	4	8.625	6.813	0.906	0.906	59.71	6.875
8″ Long Type “A”	8	10.625	8	8.625	0.322	0.322	34.12	7.625	0.5

Buttweld Short Stub End Dimensions

Product	Nom. Pipe Size	Diameter (G)	Length (J)	Outside Diameter (O.D.)	Schedule 5S Approx. Weight	Schedule 5S, Inside Diameter (I.D.)	Schedule 5S, Wall Thickness (T)
1 1/2″ Short Type “C”	1.5	2.875	2	1.9	0.29	1.77	0.065
1 1/4″ Short Type “C”	1.25	2.5	2	1.66	0.21	1.53	0.065
1″ Short Type “C”	1	2	2	1.315	0.19	1.185	0.065
1/2″ Short Type “C”	0.5	1.375	2	0.84	0.13	0.71	0.065
10″ Short Type “C”	10	12.75	5	10.75	7.48	10.482	0.134
12″ Short Type “C”	12	15	6	12.75	15	12.438	0.156
14″ Short Type “C”	14	16.25	6	14	19.2	13.688	0.156
16″ Short Type “C”	16	18.5	6	16	23.9	15.67	0.165
18″ Short Type “C”	18	21	6	18	28.5	17.67	0.165
2 1/2″ Short Type “C”	2.5	4.125	2.5	2.875	0.75	2.709	0.083
2″ Short Type “C”	2	3.625	2.5	2.375	0.44	2.245	0.065
20″ Short Type “C”	20	23	6	20	36.3	19.624	0.188
24″ Short Type “C”	24	27.25	6	24	56	23.564	0.218
3″ Short Type “C”	3	5	2.5	3.5	0.94	3.334	0.083
3/4″ Short Type “C”	0.75	1.688	2	1.05	0.14	0.92	0.065
4″ Short Type “C”	4	6.188	3	4.5	1.38	4.334	0.083
5″ Short Type “C”	5	7.313	3	5.563	2.06	5.345	0.109
6″ Short Type “C”	6	8.5	3.5	6.625	2.75	6.407	0.109
8″ Short Type “C”	8	10.625	4	8.625	3.88	8.407	0.109