316Ti Stainless Steel Sheet

Item	Stainless Steel 316ti sheet (Hot rolled, Cold rolled)
Thickness	0.3~10.0mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Standard	JIS, AISI, ASTM, GB, DIN, EN, etc
Surface	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sandblast, Brush, etching, etc.
Package	Shrink-wrapped, Carton boxes, Wooden pallets, Wooden boxes, Wooden crates Etc.
Edge	Mill Edge Slit Edge

 

316TI is a metal material. It is also known as AISI 316Ti, Supra316Ti, Nirosta 4571, Polarit 761 and Remanit 4571. Ti is added to SUS316 steel to improve the resistance to intergranular corrosion. Used in equipment resistant to sulfuric acid, phosphoric acid, acetic acid. With rich experience, our stainless steel factory can provide you 316TI metal material with following features:

Chemical Components			Specification	Key Features	Typical Application
element	Minimum percentage	Maximum percentage	ASTM A240 ISO 15156-3 (NACE MR0175) BS EN 10088-3	The corrosion resistance at higher temperatures is better than that of 316 stainless steel.	Chemical processing. spring. fastener. Threaded insert. Metal mesh
C	–	0.08
Si	–	1
Mn	–	2
P	–	0.045
S	–	0.03
Cr	16.5	18.5
Mo	2	2.5
Ni	10.5	13.5
Ti	5 x C	0.7
Fe	bal
Density	7.9 g/cm³			0.285 lb/in³
Melting point	1375°C			2500°F
Coefficient of expansion	16.5 μm/m °C (21 – 100°C)			9.110 x 10-6 in/in °F (70 – 212°F)
Rigid modulus	74 kN/mm²			10730 ksi
Modulus of elasticity	193 kN/mm²			27990 ksi

Cutting+Slitting - 316stainless steel narrow strip,special length/width plate
(1) Flame cutting: The cost of flame cutting equipment is low and it is the only economical and effective means to cut thick metal plates, but it has its shortcomings in thin plate cutting.
(2) Laser cutting：Laser cutting equipment can cut stainless steel plates below 30mm. Adding oxygen to the laser beam can cut 40mm thick carbon steel, but after oxygen cutting, a thin oxide film will be formed on the cutting surface.
(3) Wire cutting: It is developed on the basis of EDM perforation and forming. It has not only developed the application of EDM but also replaced EDM perforation and forming in some aspects.
(4) Shearing cutting：Uses a moving upper blade and a fixed lower blade and uses a reasonable blade gap to apply shearing force to metal plates of various thicknesses so that the plates can be broken and separated according to the required size. A Shearing machine is a kind of forging machinery, and its main function is in the metal processing industry.
(5) Plasma cutting：It is a processing method that uses the heat of a high-temperature plasma arc to partially or partially melt (and evaporate) the metal at the incision of the workpiece and uses the momentum of the high-speed plasma to remove the molten metal to form an incision.
(6) Slitting: Also known as slitting, refers to the process of uncoiling, slitting, leveling, and winding stainless steel coils into coils of the required width.

Surface processing - 8K mirror, HL hairline, color coating，Bending+Welding - OEM customized products as drawing

√	316ti Stainless Steel sheet Used in Kitchen appliances,
√	316ti Stainless Steel sheet Used in marine applications
√	316ti Stainless Steel sheet Used in hydrogen fuel cells
√	316ti Stainless Steel sheet Used in Chemical equipment

316ti Stainless Steel Sheet Cutting
316ti Stainless Steel Sheet Slitting
316ti Stainless Steel Sheet Color coating
316ti Stainless Steel Sheet Hairline/Brush
316ti Stainless Steel Sheet Etching
316ti Stainless Steel Sheet Welding
316ti Stainless Steel Sheet Bending
316ti Stainless Steel Sheet Embossing
316ti Stainless Steel Sheet Bead Blasted
316ti Stainless Steel Sheet Polishing